Unique multi-layer Feed Block and T-die design allow material to be extruded in the relatively close temperature and meet the requirement of average cross dispensing.
1) Unique multi-layer Feed Block and T-die design allow material to be extruded in the relatively close temperature and meet the requirement of average cross dispensing.
2) According to the viscosity and melt degree of raw material, different compression ratio and the section for mixing design keep the sheet free from overheating and keep the best melting degree
3) 3 layers co-extrusion line is most suitable to the thermoplastic material.
4) Unique design of calender makes the surface of sheet flat and without wavy line.
5) Overall cleanliness and flow design without dead space are most suitable to manufacture transparent sheet products.
6) To meet customer's demand, LEADER designs different length of cooling and winding section equipment.
|
Item |
Description |
|
Materials |
PET/PMMA/ABS/PC/PP/PS/PLA |
|
Extruder |
Twin screw extruders are available in φ58/58mm~φ92/92mm according to customer preference. |
|
Single screw available in φ90mm~φ180mm |
|
|
Productivity |
200kg／hr ~ 800kg／hr |
|
Extruder HP |
190~375kW High efficiency AC three phase frequency converter motor |
|
Line Speed (max) |
12m／min |
|
T-Die |
Die head width 1000~2100mm |
|
Product thickness 0.6~4.0mm |
|
|
Forming Rollers |
φ300~φ500mm x 3 Sets |
|
Haul-off Equipment |
1 Set |
|
Annealing Oven |
2~3 Sets |
|
Corrugating Machine |
Depends on pattern |
|
Edge Trimmer |
2 Sets |
|
Waste Crusher |
2 Sets |
|
Cooling Equipment |
1 Set |
|
Micro-computer Cutting Unit |
1set |
|
Automatic Hydraulic Lifter |
1set |
|
Extruder Model |
Products Width (mm) |
Products Thickness (mm) |
Production Capacity (kg/h) |
Total Power (kw/h) |
|
SJ65 |
600 |
0.2~2 |
150~200 |
80~90 |
|
SJ75 |
600~800 |
0.2~2 |
250~300 |
110~130 |
|
SJ90 |
600~1220 |
0.2~2 |
300~500 |
180~200 |
|
SJ120 |
1220~2200 |
0.2~2 |
600~800 |
200~250 |
