PE huge caliber spiral reinforced pipe machine

Main features:
The latest research and development of large diameter polyolefin wound reinforced composite pipe production line, withindependent intellectual property rights, the pipe is divided into non-pressurized plastic to strengthen the pipeline (referred to as SL-PE tube) is the plastic pressure pipe (referred to as the SL-CR tube) two categories, national housing and urban construction is about to focus on the implementation

SL-PE pipe is high density polyethylene (HDPE) or polypropylene (PP) production in the pipeline outside the wound to strengthenthe skeleton controls into. The pipeline used to strengthen the skeleton tube, while conserving raw materials 60%, but alsoenhances the pipe ring stiffness. Even larger diameter, can bear the pressure and traffic load of the soil.

SL-CR pipe is high density polyethylene (HDPE) as the main raw material, with the the reciprocating wound PE and high-strength steel wire made, can withstand the internal pressure of 30 kg (or higher) pipeline. Wound multi-layer wire in the wall, so that theresistance to internal pressure strength of pipeline to greatly improve the manufacturing costs of the pipeline is significantly reduced. 50% cheaper this pipe material cost than the directly extruded way production of plastic pipe and socket connection, andhas great market potential.


The main technical parameters
Model pipe specifications
(mm) the maximum production rate
(m / h), total installed power
(kw) production line covers
(m * m)
SLPE-2000 Ф300 ~ Ф2000 20 300 44 * 10
SLPE-3000 Ф800 ~ Ф3000 12 300 44 * 10
SLPE-4000 Ф1500 ~ Ф4000 9 380 44 * 12